heavy duty cantilever racking system manufacturer

The cantilever rack has two kinds: double sided cantilever rack & single sided cantilever rack. It is connected with horizontal pull arms and cable-stayed, installing arms on both sides of the uprights. Mracking is a manufacturer of cantilever racking with an extensive selection of designs, sizes, and load capacity. Click on the “Quick Quote” button below to get an instant price for a cantilever racking.

Additional information

L*D*H (mm)



3Layer, 4Layer, 5Layer, Customizable

Load Capacity

1000kg, 2000kg, 500kg, Customizable


Blue, Orange, Customizable


about 500kg




5 sets

Estimated Delivery Time

15-25 days

What is cantilever racking?

Cantilever racking is a kind of warehouse racking, mainly composed of columns, cantilever arms, horizontal and diagonal bracing, etc. It is usually divided into single-sided cantilever racks and double-sided cantilever racks. Cantilever rack system is often used to store long, ring, plate and irregular shaped goods, such as steel pipes, plywood, cars, etc. The load capacity of cantilever racks is usually in the range of 200kg-1500kg per arm, and the load capacity and number of levels can be designed and customized according to the specific storage needs of customers. Learn more about what is cantilever racking.

Free design drawings for you

Layout plan

If you send us the dimensions of your warehouse, our professional engineers will design an accurate drawing for you.
request drawing design

Three-dimensional view

The thickness of the materials used, the size of the racks, the number of levels, and other parameters will let you confirm.
request drawing design


Our engineers can also produce renderings and installation step-by-step drawings to facilitate the installation of your racks.
request drawing design

Application of cantilever racking

Cantilever racks are used to storing materials into the pipe, and irregular products. Always used for machinery manufacturing industry and building materials supermarket, etc. After adding the clapboard, particularly suitable for small space, the warehouse’s height is low, management convenience, wide field vision, utilization rate is higher than the ordinary rack.

The Main Production Process Of Cantilever Racking

Punching Process

Punches run the length of the hanging plate at standard intervals where the cross beams are connected, most of them are 50mm or 75mm pitch.

Rolling Process

Steel coil through the rolling equipment to form the upright and beam, beam usually have P beam and interlock beam, upright usually have diamond hole and teardrop hole.

Welding Process

Through welding, the hanging plate and beam; upright and footplate are closely connected together, which effectively strengthens the stability of the rack structure.

Spraying And Baking Process

Polish the product after welding, then use electrostatic powder spraying technology on the surface, and finally use the high-temperature baking process to ensure a smooth surface.

Packaging Process

Finally came to the last step. After the production of the product is completed, we usually package the exported goods to avoid long-distance transportation damage and seawater erosion during shipping.

Our products are packaged in the following ways

Air Bubble Film
Air Bubble Film
Pallet Packaging
Pallet Packaging
Wooden Case
Wooden Case
Carton Box
Carton Box

What you want to know about cantilever racks

Cantilever rack is suitable for storing long materials, ring-shaped materials, plates, pipes and irregular goods. It is divided into single sided cantilever rack and double sided cantilever rack, which features stable structure, good load capacity and high space utilization.

Single sided cantilever rack is not placed against the wall is also possible, because industrial cantilever racks are fixed to the ground, placed against the wall is only to make full use of warehouse space. In fact, it is not directly attached to the wall, but independently fixed to the ground. Remember not to overload, otherwise it is easy to collapse and other safety accidents.

  1. No obstacle to making loading and unloading fast and easy.
  2. The cantilever steel rack is easy to adjust up and down to suit the load height of various items.
  3. Items of different lengths can be stored; there is no restriction on the length of products.

Light duty cantilever rack with a load capacity of 500 kg or less per cantilever arm is usually used to store lighter materials. If manual access is used, the height of the racking is usually controlled within 2.5 meters and the length of the arm is within 1.5 meters. Heavy duty cantilever racks have a load capacity of 1500kg or less per arm, and the total load capacity of a single group of racking does not exceed 20,000kg, with H steel uprights and an arm’s length of 1.8m or less.

The arm length of general cantilever rack is 600-1200mm, and most cantilever racking system is custom-made. Because the needs of each warehouse are different, the design length needs to be planned according to the actual needs so that the racks can ensure the stability of the structural cantilever.

Cantilever rack can of course be used in combination with racking pallets, and this is also called cantilever pallet racking. However, the utilization rate of cantilever storage racks will be reduced after using pallets, and long strip-shaped goods, such as pipes, cannot be stored. If you must use pallets, it is recommended that it would be better to use pallet racking.

Goods can be placed directly on the base of cantilever rack, but goods exceeding the loading capacity cannot be stacked. Cantilever storage rack can be designed as cantilever mezzanine racking to make full use of warehouse space and enhance storage capacity. It is also possible to add plates or pallets for high flexibility in use. Warehouse cantilever rack is mostly used in machinery manufacturing industry and building materials industry, so it is also called cantilever lumber rack, cantilever pipe rack, etc. It is suitable for manual access to goods, and also suitable for forklift access to goods. Before customization, the access method should be determined, because the access method is different, the distance of placement is also different, for example, forklift access, it is necessary to reserve the channel suitable for forklift.

Step 1: Connect the base of the cantilever rack to the upright and fix it.
Step 2: After installing two sets of bases and uprights, connect and fix these two cantilever frames with horizontal bracing and diagonal bracing.
Step 3: Connect the rack cantilever rack arm with the upright and fix it with accessories.
Step 4: After installation according to the drawing, fix the cantilever racks on the ground.

Cantilever rack is a type of storage racking that consists of a combination of loading uprights and cantilever rack arms, and it is customized according to the customer’s needs. The price of cantilever racking system needs to be determined based on the racking solution to be quoted to the customer. Generally, the price of cantilever rack range from 160 to 500 USD, and the higher the load capacity and storage volume, the higher the price.

1. Prevent overweight.
Cantilever racking systems are usually manufactured according to different loading capacities, so the daily use of cantilever shelves to store goods, must not exceed its own weight can load. If necessary, you can get an overweight sign in the warehouse.

2. Anti-collision design.
Cantilever rack is usually used in combination with forklifts, in order to avoid staff colliding with the racks during forklift operations, the racks should be equipped with the appropriate anti-collision rails according to the width of the channel and auxiliary facilities.

3. Timely maintenance.
In the material of cantilever rack manufacturers chooses cold-rolled steel, if it is placed in the sunlight and humid environment for a long time, then the surface of the racking will appear rust, paint and other phenomena. Once these phenomena appear, the management should be timely maintenance treatment.

Get instant quotes from our cost engineers

Want to know how many rack products your country imports from China every year?

You may also be interested in these products

selective pallet rack
selective pallet rack
mezzanine floor
mezzanine floor
drive in racking
drive in racking
structural steel mezzanine
structural steel mezzanine
Talk about your project

Get an instant quote from our most experienced consultants.

Your email is absolutely secure and we’ll not disclose it to any third party for any reason.

Get quick quotes from suppliers!

Your email is absolutely secure and we’ll not disclose it to any third party for any reason.