warehouse pallet racking beams for sale

When selecting a pallet rack beam, it is important to consider the following factors:

Load capacity: The beam must be able to support the weight of the pallets and the products being stored on them. It is important to choose a beam with a load capacity that is equal to or greater than the total weight of the pallets and products being stored.

Pallet Racking Beam Size: The size of the beam will depend on the width of the pallet rack system and the distance between the uprights. Beams are typically available in various lengths and depths to accommodate different storage configurations.

Compatibility: It is important to ensure that the pallet rack beams are compatible with the uprights and other components of the pallet rack system. Beams from different manufacturers or of different materials may not be compatible with one another.

It is always recommended to consult with a professional or the manufacturer of the pallet rack system to determine the most suitable beam for your specific application.

The standard size for pallet rack beams varies depending on the manufacturer and the specific requirements of the storage system. The size of the pallet rack beam is important because it determines the maximum weight that the beam can support. The beam size should be chosen based on the weight of the pallets being stored, as well as the spacing between the beams and the overall load capacity of the storage system.

Typically, pallet rack beams are available in a range of sizes to accommodate different pallet sizes and weights. For example, a standard size for a pallet rack beam might be 2300mm or 2700mm in length. However, other sizes are also commonly used. For easy management and to save your purchasing time, Mracking offers you the following sizes of pallet rack beams:

• 2300*100*45*1.2/1.5/1.8
• 2400*120*45*1.2/1.5/1.8
• 2500*120*45*1.2/1.5/1.8
• 2700*140*45*1.2/1.5/1.8

It’s important to note that the standard size for pallet rack beams may vary depending on the specific requirements of your storage system and the type of pallets being stored. It’s always best to consult with a storage specialist or the manufacturer of the pallet rack system to determine the appropriate beam size for your needs.

Due to the different molds used to produce pallet rack beams, different pallet rack beam manufacturers produce different pallet rack beams, but for the convenience of customers, pallet rack beam manufacturers have unified the types of pallet rack beams, and now there are mainly three types of pallet rack beams on the market. They are pallet rack step beams, teardrop pallet rack beams, and diamond-shaped hole pallet rack beams. Among them, teardrop pallet rack beams are the most common and are commonly used in the Americas, so if you buy teardrop pallet rack beams, they can be well adapted to your existing pallet rack.

In general, pallet rack beams are available in lengths ranging from 2000mm to 2700mm. The most common beam lengths are 2300mm, although other lengths are also available. The length of the beam should be chosen based on the width of the pallet rack system and the size of the pallets being stored.

For example, if the pallets being stored are 1200mm long, and store two pallets per level, you would need beams that are at least 2700mm long to support the pallets.

It’s important to choose the right beam length to ensure that the pallets are properly supported and the rack system is safe and stable. If the beams are too short, the pallets may not be properly supported, which can lead to accidents and damage to the material being stored. On the other hand, if the beams are too long, they may not be fully utilized, which can be inefficient and costly.

• The surface of the pallet rack beam is powder coated with a beautiful appearance.
• Various types of hole types are available with high adaptability.
• The beam is made of Q235B cold-rolled steel, and the load capacity meets international standards.

Used pallet racking beams may be an economical option for those who need to set up a pallet rack system but do not want to invest in new beams. However, it is important to carefully inspect used beams to ensure that they are in good condition and able to support the desired load. It is also important to check that the beams are compatible with the upright frames of the pallet rack system.

Mracking does not sell used pallet racking beams, and we cannot guarantee the quality of used pallet racking beams. Therefore, we only sell brand new pallet racking beams for the convenience and safety of our customers during the installation process.

Of course. Considering that you already have pallet racking in your warehouse, you only need to purchase pallet racking beams to add more levels. That’s why we offer pallet rack parts sales service, any pallet rack parts you can buy from Mracking. However, due to the large size of pallet rack beams, shipping costs are usually more expensive. We recommend you buy a certain number of pallet rack beams to reduce the shipping cost. Of course, if you have a freight forwarder in China, the problem will be solved.

We sell all types of warehouse racking beams, including narrow aisle pallet racking beams, double deep pallet racking beams, drive-in pallet racking beams, shuttle pallet racking beams, teardrop pallet racking beams, push-back pallet racking beams, gravity pallet racking beams, cantilever racking beams, boltless racking beams, adjustable racking beams, etc.

First, you need to determine the hole type of your upright. If the upright is diamond hole, you need to use diamond hole pallet rack beam; if the upright is teardrop hole, you need to use teardrop pallet rack beam to fit with it.

Secondly, we provide free pallet rack beam samples for your reference. All you need to do is send us your courier account number, or pay a certain shipping fee, and we will send you a sample for free.

Of course, you can also measure and send us the specifications of the pallet racking uprights you already have in your warehouse and take photos. Our engineers will tell you if the pallet rack beam we sell is suitable for your pallet rack upright.

Mracking offers a three-year warranty on the pallet racking beams we sell. During the warranty period, if there is any non-human quality problem with the pallet racking beam, we will replace it for you free of charge. If the problem is caused by bending due to overload, we provide repair or replacement services for you for a fee..