WhatApp: +86 13713386306
Email: nancy@chinastoragerack.com
Phone: +86 18578478231
WeChat: +86 18578478231
plastic shelf bin organizer
The storage bin shelf is made of plastic box and connecting rod combination, fully assembled structure, usually a single plastic box carrying a maximum of not more than 50kg, manual access to goods is very convenient, suitable for storage of light, small volume of goods. Often used in medical, electronic, hardware accessories and other fields.
Additional information
| Standard Size(L*D*H) | 2000*600*2000mm, Customizable |
|---|---|
| Layer | 7Layer, Customizable |
| Load Capacity | 200kg, 300kg, Customizable |
| Color | Red, Yellow, Blue, Green, Customizable |
| Weight | 70kg/set |
| Volume | 1.5CBM |
| MOQ | 20 sets |
| Estimated Delivery Time | 5 days |
Free design drawings for you
Layout plan
If you send us the dimensions of your warehouse, our professional engineers will design an accurate drawing for you.
request drawing design
Three-dimensional view
The thickness of the materials used, the size of the racks, the number of levels, and other parameters will let you confirm.
request drawing design
Renderings
Our engineers can also produce renderings and installation step-by-step drawings to facilitate the installation of your racks.
request drawing design
Installation of bin shelf
The storage bin shelf installation is very simple, there are on either side of each plastic box card slot, you just need to install two plastic card slot alignment fastening, when you need to add more layers you need to connect the connecting rod inserted into the lower plastic box at the top of the hole, then connect the upper level of the same specifications of the plastic box with hole insert the link rod.
The Main Production Process Of Bin Shelf
1
Punching Process
Punches run the length of the hanging plate at standard intervals where the cross beams are connected, most of them are 50mm or 75mm pitch.
2
Rolling Process
Steel coil through the rolling equipment to form the upright and beam, beam usually have P beam and interlock beam, upright usually have diamond hole and teardrop hole.
3
Welding Process
Through welding, the hanging plate and beam; upright and footplate are closely connected together, which effectively strengthens the stability of the rack structure.
4
Spraying And Baking Process
Polish the product after welding, then use electrostatic powder spraying technology on the surface, and finally use the high-temperature baking process to ensure a smooth surface.
5
Packaging Process
Finally came to the last step. After the production of the product is completed, we usually package the exported goods to avoid long-distance transportation damage and seawater erosion during shipping.
Our products are packaged in the following ways
Air Bubble Film
Pallet Packaging
Wooden Case
Carton Box
Get instant quotes from our cost engineers
Want to know how many rack products your country imports from China every year?
You may also be interested in these products
Talk about your project
